View EP13_4711204.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SHEET
EP13 EP cores and accessories
Supersedes data of September 2004 2008 Sep 01
Ferroxcube
EP cores and accessories
CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core set VALUE 1.24 472 24.2 19.5 14.9 4.7 UNIT mm-1 mm3 mm mm2 mm2 g
0 13 0.3
handbook, halfpage
EP13
0 4.5 0.3
0 9 0.4
2.4 0.1
MGC186
;;; ;;; ;;;
9.7 0.6 0 0 12.8 0.6
9
0.4 0
Dimensions in mm.
Fig.1 EP13 core set.
Core sets for filter applications Clamping force for AL measurements, 30 10 N. GRADE 3B46 AL (nH) 2150 25% e 2090 AIR GAP (m) 0 TYPE NUMBER EP13-3B46
Core sets for general purpose transformers and power applications Clamping force for AL measurements, 30 10 N. GRADE 3C81 AL (nH) 40 3% 63 3% 100 3% 160 3% 250 5% 1700 25% 3C91 3C94 1700 25% 40 3% 63 3% 100 3% 160 3% 250 5% 1650 25% 2008 Sep 01 e 40 62 99 158 247 1680 1680 40 62 99 158 247 1630 693 TOTAL AIR GAP (m) 1000 540 300 170 100 0 0 1000 540 300 170 100 0 TYPE NUMBER EP13-3C81-E40 EP13-3C81-A63 EP13-3C81-A100 EP13-3C81-A160 EP13-3C81-A250 EP13-3C81 EP13-3C91 EP13-3C94-E40 EP13-3C94-A63 EP13-3C94-A100 EP13-3C94-A160 EP13-3C94-A250 EP13-3C94
Ferroxcube
EP cores and accessories
AL (nH) 1500 25% 40 3% 63 3% 100 3% 160 3% 250 5% 1325 25% 3F35 1100 25% TOTAL AIR GAP (m) 0 1000 540 300 170 100 0 0
EP13
GRADE 3C96 3F3
e 1480 40 62 99 158 247 1310 1090
TYPE NUMBER EP13-3C96 EP13-3F3-E40 EP13-3F3-A63 EP13-3F3-A100 EP13-3F3-A160 EP13-3F3-A250 EP13-3F3 EP13-3F35
Core sets of high permeability grades Clamping force for AL measurements, 30 10 N. GRADE 3E27 3E5 3E55 AL (nH) 4600 25% 7000 +40/-30% 100 3% 160 3% 250 5% 315 5% 400 8% 630 15% 7000 +40/-30% 3E6 8500 +40/-30% e 4540 6900 99 158 247 311 395 622 6900 8400 AIR GAP (m) 0 0 310 180 110 80 65 40 0 0 TYPE NUMBER EP13-3E27 EP13-3E5 EP13-3E55-A100 EP13-3E55-A160 EP13-3E55-A250 EP13-3E55-A315 EP13-3E55-A400 EP13-3E55-A630 EP13-3E55 EP13-3E6
2008 Sep 01
694
Ferroxcube
EP cores and accessories
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 315 315 320 340 300 315 f = 25 kHz; B = 200 mT; T = 100 C 0.1 - - - - - CORE LOSS (W) at f = 100 kHz; B = 100 mT; T = 100 C - 0.03(1) 0.04 0.03 - 0.05 f = 100 kHz; B = 200 mT; T = 100 C - 0.17 (1) 0.22 0.17 - -
EP13
f = 400 kHz; B = 50 mT; T = 100 C - - - 0.075 0.04 0.1
3C81 3C91 3C94 3C96 3F35 3F3
Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 315 315 320 340 300 315 f = 500 kHz; B = 50 mT; T = 100 C - - - 0.15 0.06 - CORE LOSS (W) at f = 500 kHz; B = 100 mT; T = 100 C - - - - 0.45 - f = 1 MHz; B = 30 mT; T = 100 C - - - - - - f = 3 MHz; B = 10 mT; T = 100 C - - - - - -
3C81 3C91 3C94 3C96 3F35 3F3 Note
1. Measured at 60 C.
2008 Sep 01
695
Ferroxcube
EP cores and accessories
COIL FORMERS General data PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION
EP13
phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with "UL 94V-0" ; UL file number: E41429(M) copper clad steel, tin (Sn) plated 180 C, "IEC 60085", class H "IEC 60068-2-20" , Part 2, Test Tb, method 1B: 350 C, 3.5 s "IEC 60068-2-20" , Part 2, Test Ta, method 1: 235 C, 2 s
handbook, full pagewidth
2.54 13.6 max. 9.5 0.1 4.6 0.1 0.6 13.6 max. 8.9 0.1 7.6 min. 0.6
2.5 2.7 1 3.8 0.8 0.6 10.16 5.08 10.16
Dimensions in mm.
0 5.8 - 0.1
CBW618
1 +0.15 0
Fig.2 EP13 coil former; 10-pins.
Winding data and area product for 10-pins EP13 coil former NUMBER OF SECTIONS 1 2 WINDING AREA (mm2) 13.6 2 x 6.1 MINIMUM WINDING WIDTH (mm) 7.6 2 x 3.4 AVERAGE LENGTH OF TURN (mm) 23.8 23.8 AREA PRODUCT Ae x Aw (mm4) 265 2 x 119
TYPE NUMBER
CSH-EP13-1S-10P CSH-EP13-2S-10P
2008 Sep 01
696
Ferroxcube
EP cores and accessories
General data CSHS-EP13-1S-10P-T PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION
EP13
phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with "UL 94V-0"; UL file number E41429 (M) copper-clad steel, tin (Sn) plated 155 C, "IEC 60085", class F "IEC 60068-2-20" , Part 2, Test Tb, method 1B, 350 C, 3.5 s "IEC 60068-2-20", Part 2, Test Ta, method 1, 235 C, 2 s
9.5 -0.1 5.8 -0.1 4.6 +0.1 8.9 -0.1 7.5 min. 2.8
handbook, full pagewidth
9.95 max.
10.5
0.7 5 10
CBW505
0.35
1.8
11.85 15.1 max. 1.8 2.5 1.6
13.1 max.
Dimensions in mm.
Fig.3 EP13 coil former. Winding data and area product for EP13 coil former NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 13.5 NOMINAL WINDING WIDTH (mm) 7.5 AVERAGE LENGTH OF TURN (mm) 23.8 AREA PRODUCT Ae x Aw (mm4) 263
TYPE NUMBER
CSHS-EP13-1S-10P-T
2008 Sep 01
697
Ferroxcube
EP cores and accessories
MOUNTING PARTS General data ITEM Clasp Spring Clip REMARKS copper-nickel-zinc alloy (nickel silver), tin (Sb) plated copper-nickel-zinc alloy (nickel silver) stainless steel (CrNi); clamping force 32 N FIGURE 4 5 6
EP13
TYPE NUMBER CLA-EP13 SPR-EP13 CLI-EP13
handbook, halfpage
16.8 2.6 0.4 TYP 1 12.7 0.4 TYP 4
handbook, halfpage
14
7.5
11.7
CBW619
12.9
7.5
MGB590
Dimensions in mm.
Dimensions in mm.
Fig.4 Mounting clasp CLA-EP13.
Fig.5 Mounting spring SPR-EP13.
handbook, halfpage
12.8 +0.2 0 6.8
14.5
12.2 0 -0.3
CBW090
0.25
6
Dimensions in mm.
Fig.6 Mounting clip CLI-EP13.
2008 Sep 01
698
Ferroxcube
EP cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
EP13
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
699

▲Up To Search▲

Price & Availability of EP13

	To Download EP13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .